Current time: 07-07-2020, 02:05 AM Hello There, Guest! (LoginRegister)

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Test locations don't show up in list
10-07-2018, 04:02 AM
Post: #2
RE: Test locations don't show up in list
The agents are configured through metadata (wpt_data key). If you configured the server using the script it should have provided the metadata string to use: https://github.com/WPO-Foundation/webpag...r-software

Here are the steps for the agent instances: https://github.com/WPO-Foundation/webpag..._agents.md

The main issue I have seen is that sometimes the auto-generated server name doesn't work. If you replace the server name in the wpt_server= part of the string with the private IP address of the instance (10.x.x.x) that usually clears it up.

The agents will also normally auto-identify their location based on the region they are running in so you can use a single template across all regions. If you want to use specific location ID's you can set up a template for each region and add wpt_loc= with the appropriate location ID (and the key).
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: Test locations don't show up in list - pmeenan - 10-07-2018 04:02 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)