Current time: 11-17-2019, 05:04 PM Hello There, Guest! (LoginRegister)

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
First Byte Time
08-16-2012, 10:29 AM
Post: #1
First Byte Time
Can someone give me insight on why my First Byte Time is so long? I know is a server issue, but where to look?

http://www.assisisoft.com

Thanks!
Rich
Find all posts by this user
Quote this message in a reply
08-17-2012, 11:54 PM
Post: #2
RE: First Byte Time
You are going to have a couple of different strategies depending on your site's architecture and the skill level of the developers looking at the issue.

If you are on VPS or dedicated hosting and have someone that can work on the code directly you'll want to install New Relic. It will profile your back-end performance live in production and tell you exactly where the slow spots are.

If you are on shared hosting then you're basically going to have to instrument your server-side code with timings to see if you can track down where the time is going manually.

Are you using a publishing platform of some kind or is it a custom app?
Visit this user's website Find all posts by this user
Quote this message in a reply
08-19-2012, 06:06 AM
Post: #3
RE: First Byte Time
Hi All, I had shocking TTFB on my websites when hosted on Godaddy - moved a few to a local hoster in Australia which is OK

The very best results I get are hosting on our own computers in our office (DSL) and offloading all the images CSS etc to a CDN

The only problem I have is worrying about the modem failing if I'm on holidays or away from the office for some time

Cheers
Visit this user's website Find all posts by this user
Quote this message in a reply
08-24-2012, 12:55 AM
Post: #4
RE: First Byte Time
So I'm new to webpagetest and appreciate all the work that has gone into it. I have a couple of questions though...

The TTFB target - is that something WPT calculates? (e.g. it's not something I set myself)?

Also, I ran a couple of tests and I know our site has HUGE performance issues... in fact, ttfb was 5.594 seconds... But when I look at the target, there is no target. The line has no number next to the ms. I'm curious if that's due to our slow time or something else. As I present these scores, grades, and suggestions to our directors and CTO, I'd like to be able to give an explanation of certain metrics, and since I don't see a target TTFB, I'm not sure how to show them a comparison.

Any advice? insight?

Thanks in advance!
Find all posts by this user
Quote this message in a reply
08-27-2012, 10:33 PM
Post: #5
RE: First Byte Time
The TTFB Target is something that WPT calculates. It tries to set the target so that your server can spend 100ms doing the actual processing and you will still get an A and then it drops a letter grade for every 100ms after that.

It uses the socket connect time as a proxy for the RTT to the server and effectively allows for that much time + 100ms for the first byte after the request has been sent (the overall TTFB includes DNS and SSL negotiation which are also added in).

You can pretty much assume that anything over a second will fail given the letter-grade per 100ms fall-off. The target not showing up is probably a bug - if you can send me a ling to the result I can look into it.
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 2 Guest(s)