ipfw with Windows Server 2008 R2 Standard Build 7601 64bit

[Vandrix]

(04-03-2015 05:36 AM)Evgenia Wrote:  Hello!
I have a problem with wpt installation on cloud.
Operating system is Windows Server 2008 R2 Standard Build 7601 64bit.
When I try to install ipfw then Windows Server is becoming very slow.
I set Testsigning mode On.
Windows was rebooted.
Then, I installed ipfw + dummynet (like https://sites.google.com/a/webpagetest.o...nstances).
So, OS became very slow.
Second problem related to the end of the test.
I wait end of test during 480 seconds, but page was loaded earlier.
May I get this result if ipfw works uncorrectly?
And what I should do to install properly ipfw?

Same here with Windows 2012 R2 64-bit.
Very slow connection because of the dummynet driver. Tests take ages with driver enabled....

---

C:\webpagetest\dummynet>ipfw.cmd

C:\webpagetest\dummynet>set CYGWIN=nodosfilewarning

C:\webpagetest\dummynet>ipfw -q flush
2 [main] ipfw 2064 find_fast_cwd: WARNING: Couldn't compute FAST_CWD point
er. Please report this problem to
the public mailing list cygwin@cygwin.com

C:\webpagetest\dummynet>ipfw -q pipe flush
2 [main] ipfw 2740 find_fast_cwd: WARNING: Couldn't compute FAST_CWD point
er. Please report this problem to
the public mailing list cygwin@cygwin.com

C:\webpagetest\dummynet>ipfw pipe 1 config delay 0ms noerror
2 [main] ipfw 2164 find_fast_cwd: WARNING: Couldn't compute FAST_CWD point
er. Please report this problem to
the public mailing list cygwin@cygwin.com

C:\webpagetest\dummynet>ipfw pipe 2 config delay 0ms noerror
2 [main] ipfw 1872 find_fast_cwd: WARNING: Couldn't compute FAST_CWD point
er. Please report this problem to
the public mailing list cygwin@cygwin.com

C:\webpagetest\dummynet>ipfw queue 1 config pipe 1 queue 100 noerror mask dst-po
rt 0xffff
2 [main] ipfw 2992 find_fast_cwd: WARNING: Couldn't compute FAST_CWD point
er. Please report this problem to
the public mailing list cygwin@cygwin.com

C:\webpagetest\dummynet>ipfw queue 2 config pipe 2 queue 100 noerror mask src-po
rt 0xffff
2 [main] ipfw 684 find_fast_cwd: WARNING: Couldn't compute FAST_CWD pointe
r. Please report this problem to
the public mailing list cygwin@cygwin.com

C:\webpagetest\dummynet>ipfw add skipto 60000 proto tcp src-port 80 out
2 [main] ipfw 312 find_fast_cwd: WARNING: Couldn't compute FAST_CWD pointe
r. Please report this problem to
the public mailing list cygwin@cygwin.com
00100 skipto 60000 ip from any to any proto tcp src-port 80 out

C:\webpagetest\dummynet>ipfw add skipto 60000 proto tcp dst-port 80 in
2 [main] ipfw 440 find_fast_cwd: WARNING: Couldn't compute FAST_CWD pointe
r. Please report this problem to
the public mailing list cygwin@cygwin.com
00200 skipto 60000 ip from any to any proto tcp dst-port 80 in

C:\webpagetest\dummynet>ipfw add skipto 60000 proto tcp src-port 445 out
63 [main] ipfw 2276 find_fast_cwd: WARNING: Couldn't compute FAST_CWD point
er. Please report this problem to
the public mailing list cygwin@cygwin.com
00300 skipto 60000 ip from any to any proto tcp src-port 445 out

C:\webpagetest\dummynet>ipfw add skipto 60000 proto tcp dst-port 445 in
2 [main] ipfw 1932 find_fast_cwd: WARNING: Couldn't compute FAST_CWD point
er. Please report this problem to
the public mailing list cygwin@cygwin.com
00400 skipto 60000 ip from any to any proto tcp dst-port 445 in

C:\webpagetest\dummynet>ipfw add skipto 60000 proto tcp src-port 3389 out
2 [main] ipfw 2692 find_fast_cwd: WARNING: Couldn't compute FAST_CWD point
er. Please report this problem to
the public mailing list cygwin@cygwin.com
00500 skipto 60000 ip from any to any proto tcp src-port 3389 out

C:\webpagetest\dummynet>ipfw add skipto 60000 proto tcp dst-port 3389 in
2 [main] ipfw 2228 find_fast_cwd: WARNING: Couldn't compute FAST_CWD point
er. Please report this problem to
the public mailing list cygwin@cygwin.com
00600 skipto 60000 ip from any to any proto tcp dst-port 3389 in

C:\webpagetest\dummynet>ipfw add queue 1 ip from any to any in
2 [main] ipfw 2544 find_fast_cwd: WARNING: Couldn't compute FAST_CWD point
er. Please report this problem to
the public mailing list cygwin@cygwin.com
00700 queue 1 ip from any to any in

C:\webpagetest\dummynet>ipfw add queue 2 ip from any to any out
2 [main] ipfw 1280 find_fast_cwd: WARNING: Couldn't compute FAST_CWD point
er. Please report this problem to
the public mailing list cygwin@cygwin.com
00800 queue 2 ip from any to any out

C:\webpagetest\dummynet>ipfw add 60000 allow ip from any to any
2 [main] ipfw 2492 find_fast_cwd: WARNING: Couldn't compute FAST_CWD point
er. Please report this problem to
the public mailing list cygwin@cygwin.com
60000 allow ip from any to any