Current time: 11-28-2020, 04:11 PM Hello There, Guest! (LoginRegister)

Post Reply 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Test locations don't show up in list
10-08-2018, 01:05 AM
Post: #5
RE: Test locations don't show up in list
(10-07-2018 04:02 AM)pmeenan Wrote:  The agents are configured through metadata (wpt_data key). If you configured the server using the script it should have provided the metadata string to use:

Here are the steps for the agent instances:

The main issue I have seen is that sometimes the auto-generated server name doesn't work. If you replace the server name in the wpt_server= part of the string with the private IP address of the instance (10.x.x.x) that usually clears it up.

The agents will also normally auto-identify their location based on the region they are running in so you can use a single template across all regions. If you want to use specific location ID's you can set up a template for each region and add wpt_loc= with the appropriate location ID (and the key).

Awesome! This worked. I changed the wpt_server to the ip address of the server and now I'm able to connect the agents.

For future reference, editing an agent doesn't work for long. You have to run the template again and add the ip of the server there during installing the template.
Find all posts by this user
Quote this message in a reply
Post Reply 

Messages In This Thread
RE: Test locations don't show up in list - wows - 10-08-2018 01:05 AM

Forum Jump:

User(s) browsing this thread: 1 Guest(s)